Results From Cenova - Hologic Cenova Image Analytics Server 3.0 User Manual

2.2

Results from Cenova

Cenova sends its results to diagnostic review workstations (such as Hologic SecurView
DX) and PACS devices. Depending upon the application, Cenova can transmit results in
one or more forms. The table below shows output formats for each application.
ImageChecker CAD
Hologic Imaging
Biomarkers
DigitalNow HD
•
•
•
•
•
For workstations and PACS devices that do not support ImageChecker CAD
Mammography CAD SR objects but do support DICOM 6000 overlays, the Hologic
DICOM 6000 Interface solution can be used to convert the ImageChecker CAD results
(see
contact your Hologic Account Manager.
Note
DICOM 6000 version 1.1.7 is required to support CAD on synthesized 2D image results
as DICOM 6000 overlay.
Note
DICOM 6000 Interface version 1.1.7 may reside on a Cenova server.
MAN-05463-001 Revision 002
Application
CAD SR – The Mammography CAD SR format is the DICOM standard used for
ImageChecker CAD and/or Hologic Imaging Biomarker results.
SC Image – Mammography CAD SC (Secondary Capture) provides the case-
processed views (normally the four screening views) with ImageChecker CAD, or
Hologic Imaging Biomarkers. For ImageChecker CAD and Hologic Imaging
Biomarkers, this format is for workstations that do not support Mammography CAD
SR.
RTSS – The Radiotherapy Structure Set format was developed specifically to display
ImageChecker CAD results on certain GE review workstations.
Printer – This format provides ImageChecker CAD results for the case-processed
views (normally the four screening views).
MG Image – This format (DICOM Digital Mammography X-Ray Image – For
Presentation) provides DigitalNow HD images.
ImageChecker CAD with DICOM 6000 Data Flow
Cenova Image Analytics Server 3.0 User Guide
CAD SR SC Image
X X
X X
on page 15). For more information,
Chapter 2: System Description
RTSS Printer MG Image
X X
X
Page 11