Installation And Maintenance - Hologic Cenova Image Analytics Server 3.0 User Manual

1.4.2

Installation and Maintenance

Observe the following instructions that, if not followed, can result in a hazardous
condition:
•
•
•
•
This product contains no user-serviceable parts. To prevent damage to the server:
•
•
•
•
MAN-05463-001 Revision 002
WARNING:
The symbol next to the power connector indicates a potential shock hazard.
To reduce the likelihood of electrical shock or fire hazard, connect the
computer only to a power receptacle that is properly grounded and provides
voltage and current within the specifications of the server.
To connect primary power to the server, always use a three-conductor
grounded power cable that meets local regulatory standards. Use of a two-
prong adapter disconnects the utility ground and creates a severe shock
hazard.
Cenova servers are heavy! If you have any concerns about lifting or
positioning the server, request assistance.
Before cleaning the server, always shut down the server according to the
procedures in this guide and disconnect the power cord to prevent electrical
shock. Never use alcohol, benzene, thinner, or other flammable cleaning
agents.
Caution:
Maintain equipment in a well-ventilated, air-conditioned environment that
meets the temperature and humidity specifications provided in the product
service guide.
Do not install or repair the Cenova server. Only trained personnel,
authorized by Hologic, are qualified to install or repair the server.
Disconnect power cord before moving or servicing.
Install the server behind the institution firewall for network security and
antivirus protection. Hologic provides no computer virus protection or
network security for the server. If antivirus software is required, visit the
Hologic website for information about the Hologic cybersecurity program
and antivirus software installation guidance.
Cenova Image Analytics Server 3.0 User Guide
Chapter 1: Introduction
Page 7