Table of Contents
Advertisement
Chapter 3
System Operation
3:
•
•
•
•
•
Once configured, little direct interaction with the Cenova server is necessary. Any
interaction with the server is through a web browser and a user-friendly interface.
3.1
Clinical Workflow
To view results produced by the Cenova server with the patient's mammography
images, follow the guidelines of your workstation vendor. Radiologists typically review
mammography images using a protocol similar to the sequence shown in the following
table:
Preliminary Review
DigitalNow HD
Hologic Imaging
Biomarkers
Preliminary
Assessment
Computer Aided
Detection
Final Assessment
3.2
Sending Images to the Server
The server accepts the images automatically as they are sent from the image acquisition
system, film-scanner, or archiving device. The Cenova server groups successive images
with the same DICOM study instance UID (unique identifier) into a case if the images are
received within a time-out period configured by the service representative upon system
installation. The time-out period is not fixed; the server automatically adjusts the time-
out period to maximize throughput. (For more information, contact Hologic Technical
Support.)
MAN-05463-001 Revision 002
Clinical Workflow
on page 21
Sending Images to the Server
Server Startup and Shutdown
Accessing Unique Device Identifier (UDI) Information
Using Case Manager
on page 25
For this step
Reviews the mammography images to get a preliminary
sense of the patient's status.
Compares prior digitized film images to the new
mammography images.
Reviews and notes the Biomarker findings.
Examines the mammography images in detail and forms a
primary diagnosis.
Views CAD marks and evaluates related ImageChecker
data to determine if other areas on the images warrant
further review.
Makes a final assessment and creates a report.
Cenova Image Analytics Server 3.0 User Guide
on page 21
on page 22
The radiologist
Chapter 3: System Operation
on page 25
Page 21
Advertisement
Table of Contents
Need help?
Do you have a question about the Cenova Image Analytics Server 3.0 and is the answer not in the manual?