Install the PA-400 Series Firewall
STEP 4 |
Install the power adapter in the power adapter wall-mount bracket.
(PA-440, PA-450, and
bracket using the Velcro strap and cable e. Make sure to align the cable e with the notches
in the bracket to prevent the power cord from falling out. .
Connect the second power adapter through a different circuit breaker to provide power
redundancy and allow for electrical circuit maintenance.
(PA-410) Install the power adapter in the power adapter wall-mount bracket by first placing
the power supply into the bracket, aligning the feet of the power adapter with the four small
holes on the wall mount bracket. Next, loop the Velcro strap through the side openings on the
PA-400 Series Next-Gen Firewall Hardware Reference
PA-460) Install the power adapter in the power adapter wall-mount
26
2021 Palo Alto Networks, Inc.
©