Omron H7BX Manual page 24

Twin Counter Operation
Two independent counters are built in.
Counter input
Reset input
Present value display and
setting
Reset operation
Note: 1. Only 2-stage models
2. Increment mode only for counters 1 and 2.
3. The settings for prescaling and the decimal point are used by both counter 1 and 2.
Reset Function List
1-stage/2-stage
Function
counter
Display in Present value/
run mode set value (1, 2)
Reset/ Present value
reset 1 and output reset.
Total reset/
No effect.
reset 2
Present value
Present value
Reset Key
and output reset.
Counter 1
CP1
Reset 1
Counter 1 display
Counter 1 present value
Switched with
the Key.
Counter 1 set value
Only counters appearing on the display will be reset.
Total and preset counter
Present Present
Total count
value/ value/
value
set value set value
Present value and output Present value and output
reset.
Only the total count value is Batch count value and batch
reset.
Present value,
Present value
total count
and output
and output
value, and
reset. reset.
output reset.
Counter 2
CP2
Reset 2
Counter 2 display
Counter 2 present value
Counter 2 set value
Batch counter Dual counter
Batch count Dual count
value/ value/
batch count dual count
set value set value
Only the CP1 present value is
reset.
Only the CP2 present value is
output reset.
Present value,
batch count CP1 present value, CP2
value, output present value, dual count
and batch value, and output reset.
output reset.
Twin counter
CP1 present
Present
value/
value 1/
CP2 present
Set value 1
value
Only the CP1 present value is
reset. reset.
Only the CP2 present value is
reset. reset.
CP1 present
value reset
H7BX
Present
value 2/
Set value 2
CP2 present
value reset
24