Slide the cover as far forward as possible to close off the open area, thus prevent hot exhaust air from
recirculating back through the rack.
2
Rear cable access cover
Slide the cover all the way open or closed, or in any intermediate position. Leaving the cover open provides
extra exhaust area for components near the top and bottom of the rack; however, in some configurations,
this shortens the hot air recirculation path from the rear to the front.
Cable access openings on the rear of the rack cabinet
Figure 83. Cable access openings on rear side of the rack cabinet
There are four 101.6 x 101.6 mm openings on each side of the rear side of the cabinet:
• U8 to U10
• U14 to U16
• U26 to U28
• U33 to U35
.
75
Chapter 4
Managing cables and hoses