Table of Contents
Advertisement
Figure 79. Installing a 1U PDU or console switch
Install four M6 clip nuts on the rack flanges as shown in the illustration.
Slide the device all the way into the side pocket.
Secure the device with four M6 screws.
Step 4.
Complete all the required cable connection and setup of the device. Refer to the document that
comes with the device for details.
• Make sure to complete all the required cable connection and device setup before installing
baying kits to the cabinets, as these tasks will be hard to operate afterwards.
• It is advised to complete all the cable connection and setup task for the device before installing
the side cover back.
Step 5.
Install the side cover back (see "Install a side cover" on page 82).
72
ThinkSystem Heavy Duty Full Depth 42U Rack Cabinet User Guide
Advertisement
Table of Contents
