Table of Contents
Advertisement
Step 1.
If any devices are installed to the extension panels, remove them (see "Remove a 0U PDU" on page
126 or "Remove a 1U PDU or console switch from the rack side" on page 130).
Step 2.
Remove the door from the rack cabinet (see "Remove a door" on page 83).
Step 3.
Remove the two hinges, two door stops, and the door latch if necessary.
Figure 136. Removing the door hinges, doorstops and latch
Step 4.
Remove the four screws that secure each of the two front covers, and remove the covers.
120
ThinkSystem Heavy Duty Full Depth 42U Rack Cabinet User Guide
Advertisement
Table of Contents
