Advertisement
INSTALLATION GUIDE
Switch System
4 Person Workstation
Size: 1200mm
Tools Required: Power screwdriver.
Note: Please ignore any pre-drilled holes or nut inserts that maybe present in your top(s). They will not match your particular
table/desk base and woods screws will be required to be screwed directly into the underside of the top.
Note: It is important to fully tighten all bolts and screws before attaching the top(s) so that the frame is su ciently rigid.
Failure to do this may a ect stability once the tops are attached.
www.jasonl.com.au
Need help!
Call us on
1300 527 665
Page 1 of 5
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Jason.L Switch System 4 Person Workstation
Summary of Contents for Jason.L Switch System 4 Person Workstation
- Page 1 www.jasonl.com.au INSTALLATION GUIDE Switch System Need help! Call us on 4 Person Workstation 1300 527 665 Size: 1200mm Tools Required: Power screwdriver. Note: Please ignore any pre-drilled holes or nut inserts that maybe present in your top(s). They will not match your particular table/desk base and woods screws will be required to be screwed directly into the underside of the top.
- Page 2 www.jasonl.com.au INSTALLATION GUIDE Switch System Need help! Call us on 4 Person Workstation 1300 527 665 Size: 1200mm COMPONENTS Table Top x4 (1200x800mm) Leg x6 Leg Bracket x6 Beam Bracket x10 T Beam Bracket x2 Long Beam x3 (1150mm) Short Beam x4 (915mm) L-Bracket x15 SCREWS Hex Nut x6...
- Page 3 www.jasonl.com.au INSTALLATION GUIDE Switch System Need help! Call us on 4 Person Workstation 1300 527 665 Size: 1200mm Join Leg Brackets to each Leg using screws to secure them, as follow. Join 2 L-Bracket through each 1150mm Beam and 1 L-Bracket through each 915mm Beam. Securely connect each Beam to each Beam Bracket.
- Page 4 www.jasonl.com.au INSTALLATION GUIDE Switch System Need help! Call us on 4 Person Workstation 1300 527 665 Size: 1200mm Position as presented, and proceed to screw to ensure each corner of the frame. If this bolt does not drop into the joint use the Allen key to screw it all the way in so that it creates its own thread.
- Page 5 www.jasonl.com.au INSTALLATION GUIDE Switch System Need help! Call us on 4 Person Workstation 1300 527 665 Size: 1200mm 25mm Once we get the whole frame ready, ensure the worksurface is centered over the frame. If you are planning to install a divider screen, leave a 25mm gap between tables.
Need help?
Do you have a question about the Switch System 4 Person Workstation and is the answer not in the manual?
Questions and answers