Table of Contents
Advertisement
5.5
The instrument is in backlight
Press
"LIGHT"
of backlight brightness to choose from.
6
Menu instructions
6.1
Routine
measurement menu
The routine measurement menu is shown in the figure above.
AVG/MAX/MIN record reset: used to reset the AVG/MAX/MIN
recorded value on the main measurement interface.
AVG/MAX/MIN display: used to select which statistic data to
display on the main measurement interface. After that, press the
"MODE "
key to switch.
Pressure zero calibration: used to zero check the pressure gauge
when the sensor is empty
Pressure unit selection: used to directly select the pressure unit you
want to display.
to adjust the backlight brightness, there are 3 levels
8
Advertisement
Table of Contents
