ACTiSYS ACT-IRx24UN-Lx User Manual page 14

4.
At the end of the installation, you will need to restart your computer. Close all programs and
click [Restart] to complete installation and reboot the system
5. After rebooting the system,you can now plug ACT-IRx24UN to the USB port.You can first run
the System Profiler program under the Applications-Utilities folder. Click USB hardware
inside System Profiler and look for "USB-Serial Controller" or "USB-Serial Controller D".
This means that the hardware device is detected by your Mac computer.
 Copyright 2005-2014 ACTiSYS Corp
Confidential Information
The Wireless Connectivity Expert
Page 14 of 28
ACT-IRx24UN-Lx / ACT-IRx24UN-Lx-LE
.
Mar. 24, 2014
User's Manual
Version 1.3.4