Table of Contents
Advertisement
ment nut securely.
* When wood material is 10 mm (3/8") or less
thick, adjust the cutting depth so that the blade
protrudes approx. 5 mm (3/16") from the bot-
tom of the material.
Fig. 9
Rip fence (EY3500B7727)
(Available as an accessory, not included)
Rip fence is convenient for rip cuts and repeated
cuts of uniform width.
• Remove battery pack.
• Insert rip fence and adjust cutting width. (See
Fig. 10)
• Fasten screw securely to fix rip fence.
Fig. 10
Collecting Dust
WARNING
* Before cutting metal materials, always empty
the dust case, open the front cover and remove
the dust.
• Use the cutter with the flammable materials in
the dust case to cut metal materials may re-
sult in fire.
* When cutting metal materials, always use the
cutter with the dust case attached.
• Flying sparks and metal chips may cause in-
jury.
* When cutting metal materials, do not attach a
vacuum cleaner.
Sparks and hot metal chips may cause the
vacuum to be caught in fire. Operate the vac-
uum cleaner in accordance with its instruc-
tions.
(1) Collect dust in the dust case.
* Empty the dust case when it is filled up with
dust.
* Empty the dust case before storing the
cutter.
* Dust case capacity
• When cutting electrical conduit with a
diameter of 25 mm (1"), approximately xx
cuts
• When cutting 45 mm (25/32") x 45 mm
(25/32") lumber, approximately
NOTE
The unique physical properties of some materials
may cause dust to become clogged inside the
front cover when cutting those materials.
Fig. 11
(2) Use with vacuum cleaner to collect dust.
* Connect the cutter to the hose using the
EY9X012E vacuum cleaner hose adapter
(sold separately).
Compatible hose inner diameter: 25 mm
(1") to 38 mm (2/1")
* Operate the vacuum cleaner obeying its in-
structions.
- 10 -
xx
cuts
Advertisement
Table of Contents
