Initialize The Camera - Reolink Go User Manual

Charging indicator:
Green LED
Orange LED
Notes:
• The battery is a built-in one. Please do not remove it from the camera.
• The Solar Panel is NOT included in the package, you can buy one on Reolink's
official online store.

Initialize the Camera

1. Download and launch the Reolink App or Client software, and follow the
onscreen instructions to finish initial setup.
Scan to download the Reolink App.
2. Please turn the camera and wait for the camera starting up until you hear the
camera prompt "Network connection succeed".
3. Scan the QR code on the back of the camera. If the phone doesn't respond,
please tap Input UID/IP and then manually type in the UID (16-digit characters
under the QR code of the camera).
User Manual
Reolink 4G Battery-Powered Camera
Fully charged
Charging
18