Related Manuals for Crosley CF3028
Summary of Contents for Crosley CF3028
- Page 2 Top Panel Left Frame Bottom Panel Right Frame Back Panel 1 PC 1 PC 1 PC 1 PC 1 PC Drawer Right Door Drawer Front Drawer Left Adjustable Shelf Panel Panel Panel 1 PC 1 PC 1 PC 1 PC 1 PC Drawer Back Drawer Bottom...
- Page 3 Short Screw Long Bolt Barrel Nut Wood Dowel Door Magnet Shelf Holder 149*28*10mm Hinge Hook Locking Caster Handle Towel Bar Caster Allen Wrench ADDITIONAL TOOLS (Not Provided) Note: It is not recommended to use power tools during assembly Phillips Head Screwdriver Note: Wood dowels are intended for alignment.
- Page 4 Please do not use tools to assemble this unit unless specifically indicated. Step 1. Attach handle (part #11) to drawer front panel (part H) using round head bolts (part #4) and phillips head screwdriver. Insert drawer left panel (part I) and drawer right panel (part J) into drawer front panel (part H) pull down to lock.
- Page 5 Step 2. Attach door magnet (part #10) to front rail (part N) using round head screws (part #1) and phillips head screwdriver. Step 3. Attach towel bar (part #14) to left frame (part B) using bolts (part #5) and allen wrench (part #17).
- Page 6 Attach hinges (part #12) to door (part F) using short screws (part #2) and phillips Step 4. head screwdriver. Step 5. Attach left frame (part B) to bottom panel (part D) using long bolts (part #6), barrel nuts (part #7), allen wrench (part #17) and phillips head screwdriver.
- Page 7 Attach front rail (part N) to frames (parts B & C) using wood dowels (part #8). Step 6. Attach right frame (part C) to bottom panel (part D) using barrel nuts (part #7), long bolts (part #6), allen wrench (part #17) and phillips head screwdriver. Step 7.
- Page 8 Attach back rail (part M) to assembled unit (parts B, C & E) using long bolts Step 8. (part #6), barrel nuts (part #7), allen wrench (part #17) and phillips head screwdriver. Step 9. Carefully lay down unit on a flat, soft surface, such as carpet. Attach locking casters (part #15) and casters (part #16) to frames (parts B &...
- Page 9 Step 10. Carefully turn unit upright. Attach top panel (part A) to left frame (part B) and right frame (part C) and lock the hardware. Step 11. Slide assembled drawer into place. Place shelf holders (part #9) into desired position and then slide adjustable shelf (part G) into place.
- Page 10 Step 12. Attach door (part F) to right frame (part C) using short screws (part #2) and phillips head screwdriver. Attach hooks (part #13) to right frame (part C) using short screws (part #2) Step 13. and phillips head screwdriver. Attach handle (part #11) to door (part F) using round head bolts (part #4) and phillips head screwdriver.