Page 3
Support Plate Adjustable shelf Framed Mirror 3pcs Round Head Bolt Shelf Support Ø6.5mm Knob Ø29*27mm Ø5/32"*19mm 12pcs Long Screw Ø4*57mm Wall Anchor Ø8*38mm 4pcs 4pcs EXTRA HARDWARE LIST ADDITIONAL TOOLS ( Not Provided) Note: It is not recommended to use power tools during assembly. You may use power tools to assist in mounting the safety strap kit to the wall.
Page 4
Hold the Support Plate (2) in the desired location of the wall unit. This plate will be about 2-1/2” lower than the top of the wall unit. Making sure the Support Plate (2) is level, use a pencil to mark the anchor locations using the Support Plate (2) screw holes as a guide. We recommend using a leveler to make sure the Support Plate (2) is oriented correctly.
Page 5
Insert Shelf Supports (C) into predrilled holes at desired shelf heights. Insert Adjustable Shelves (3) into Shelf Supports (C) . Attach Knob (A) to cabinet door using Round Head Bolt (B) . Adjust the hinge if the door is loosened or tight .