Igniter Trouble-Shooting - Quadra-Fire MT VERNON-AE Troubleshooting Manual

Hide thumbs

Table Of Contents

Table of Contents

MT VERNON-AE TROUBLE SHOOTING MANUAL

SNAP DISC

15 volt DC INPUT

BATTERY BACKUP

COMBUSTION

BLOWER

Items to check:

Check the igniter(SRV7000-462):

*Check for continuity in the igniter (should get around 36

ohms) or apply direct power to it. (This is an AC component)

Check the AC power supply harness (#7034-220):

*Check for power or a broken connection.

Check for power at the igniter harness

*Make sure all connections are good.

*Check for continuity in the wire harness.

Check for power at the control board (SRV7000-456):

*Unplug the unit and restart. Make sure the wall control says

"Startup".

*If power is not present, check the fuse or replace the control

board.

UPDATE:

*Igniter chamber update communication was sent out on

Sept. 18, 2007. This update will increase the service life of the

igniter.

9-30-2010