Zumtobel DIMLITE Product Handbook page 6

Safety instructions
The instructions in this chapter have been compiled
to ensure that operators and users of the Zumtobel
DIMLITE lighting control are able to detect potential
risks in good time and take the necessary preventative
measures�
The operator must ensure that all users fully under-
stand these instructions and adhere to them� This
device may be installed and configured only by suitably
qualified personnel�
Use of system
Proper use
Control of indoor lighting systems�
The device may only be used for this intended purpose�
Improper use
Outdoor use�
Extensions and modifications to the product�
Use of third-party components and accessories that
have not been specifically approved by Zumtobel�
Warning
Improper use could result in injury, malfunction or da-
mage to property� The operator must inform all users of
the potential risks associated with the use of the equip-
ment and about protective countermeasures�
Surroundings
Not to be used in corrosive or explosive surroundings�
2 DIMLITE Installation and commissioning manual 4.0 | 01.2014 | en
S A F E T Y I N S T R U C T I O N S
Dangers associated with
the operation of the system
Danger of death from power
Countermeasures
Disconnect the power to the entire lighting system be-
fore working on the lighting system�
Risk of damage caused by condensation
Countermeasures
Prior to commissioning the system, wait until the control
device is at room temperature and completely dry�
Risk of damage from humidity
Countermeasures
Only use the control device in dry rooms and protect it
against humidity�
Electromagnetic compatibility (EMC)
Although the Zumtobel control device meets the strin-
gent requirements of the appropriate directives and
standards on electromagnetic compatibility, it could
potentially interfere with other devices under certain
circumstances�