Zumtobel DIMLITE Product Handbook page 36

Table of Contents

Advertisement

4� Upon delivery, the ED-SENS multi-sensor is assigned to all luminaire groups� To enable assignment to indivi-
dual luminaire groups, you must first delete the assignment to all luminaire groups�
To do this, briefly press the on/off key on the IRTOUCH remote control� As soon as the assignment of the
ED-SENS multi-sensor to all luminaire groups has been deleted successfully, the green LED on the ED-SENS
flashes briefly�
5� Press the preset key on the IRTOUCH remote control which corresponds to the luminaire group to which you
wish to assign the ED-SENS multi-sensor�
The green LED on the IRTOUCH remote control begins flashing for three seconds�
A
B
C
1
D
2
E
3
6� Press the on/off key on the IRTOUCH remote control within this time�
The selected luminaire group is assigned to the ED-SENS multi-sensor�
3 s
A
B
CAUTION: If a preset key is not pressed or the on/off key is not pressed within the three-second time frame,
C
1
the ED-SENS multi-sensor assignment is deleted for all luminaire groups (see step 4)�
7� If you want to assign additional luminaire groups to the selected ED-SENS multi-sensor, repeat steps 5 and 6
D
2
using the relevant preset keys�
E
3
8� To select the next ED-SENS multi-sensor, press the dimming rocker key ("+" or "-") on the IRTOUCH remote
control� The green LED on the next ED-SENS multi-sensor begins to illuminate continuously� Repeat steps 5 to
6 to assign luminaire groups to the selected ED-SENS multi-sensor�
9� To complete the assignment, press one of the 3 scene keys on the IRTOUCH remote control� The green LED
on the selected ED-SENS multi-sensor goes out�
Note:
! The following luminaire groups are assigned to the following preset keys on the remote control:
Preset key A – luminaire group 1
Preset key B – luminaire group 2
Preset key C – luminaire group 3
Preset key D – luminaire group 4
! If more than one ED-SENS multi-sensor are assigned to a luminaire group, please note the following: all assi-
gned ED-SENS multi-sensors are active for the presence-linked control of this luminaire group� The order of
assignment does not affect presence-linked control�
32 DIMLITE Installation and commissioning manual 4.0 | 01.2014 | en
1 x
C O N F I G U R A T I O N

Advertisement

Table of Contents
loading

Table of Contents