Zumtobel DIMLITE Product Handbook page 14

Conventional momentary-action switches
Momentary-action switches can be connected directly to the inputs on the DIMLITE control device and on the
ED-SxED input device connected to the control device at input Contr�IN�
Inputs T1, T2, T3, T4 and T all
Single momentary-action switch control:
Briefly pressing the momentary-action switch alternates between recalling the last value set for the luminaire
group in question and switching off the lighting� Holding down the momentary-action switch dims the associated
luminaire group up or down alternately between 1% and 100%�
Double momentary-action switch control:
Briefly pressing the momentary-action switch connected to Tx ↑ recalls the last value set for the luminaire
group in question� Briefly pressing the momentary-action switch connected to Tx ↓ switches off the lighting for
the luminaire group in question� Holding down the appropriate momentary-action switch dims the associated
luminaire group between 1% and 100%�
Connected to ED-SxED
Rotary selector switch on ED-SxED set to 0:
Briefly pressing the momentary-action switch alternates between recalling the last value set for the luminaire
group in question and switching off the lighting� Holding down the momentary-action switch smoothly adjusts the
associated luminaire group up or down alternately between 1% and 100%�
Rotary selector switch on ED-SxED set to 1:
Lighting scenes 1-3 are recalled or the lighting is switched off�
10 DIMLITE Installation and commissioning manual 4.0 | 01.2014 | en
D E S C R I P T I O N O F F U N C T I O N S
Connected directly to the DIMLITE control device:
Lighting scenes are called up and the lighting is switched off using
conventional 230/240 V, 50/60 Hz momentary-action switches (short
press)� Luminaire groups can also be dimmed (long press)� If the lighting
has been switched off manually, a short press calls up the last value set
for the luminaire group in question�