Main Components; Using The Appliance - Exido 12230009 Manual

MAIN COMPONENTS

1. Tamper
2. Hopper
3. Auger
4. Filter
5. Filter holder
6. Bowl
7. Cap
8. Containers for juice and pulp
9. Motor section
UK

USING THE APPLIANCE

Assembly before use
1. Check that the appliance is un-
plugged from the mains.
2. Place the motor section (9) on a flat
surface, e.g. a kitchen counter, and
make sure it is stable.
3. Place the bowl (6) on the motor sec-
tion so that the holes and pins match
up and turn the bowl until it locks in
place. See figure 1.
32