Table of Contents
Advertisement
Figure 2-9
NOT E
Other Functions
How to Connect an External Monitor
Rear Panel of the HP 8164A Lightwave Measurement System
•
Place your monitor on a flat sturdy surface.
•
Before you make any connections make sure the Lightwave
Measurement System and monitor are turned off.
•
Connect the power cable to the video input on the back of your
monitor. Tighten the thumbscrews on the plug.
•
Connect the video cable (it has a 15-pin plug) to the video
outlet on the back of the Lightwave Measurement System.
Tighten the thumbscrews on the plug.
•
Connect the power cord to the display.
•
Plug the power cord into the power outlet.
Refer to the user's guide that came with your monitor, if necessary, to
locate your monitor's output and input ports.
60
Video Outlet
Advertisement
Table of Contents
