Download Print this page

Kohler 11615 Installation Instructions page 2

Handspray with hose

Advertisement

Filter washers(1) provided with shower hose(2) must be installed in
each end of hose(2). For
5mm) instead of washer(1) at the end which connect to the
handspray. Connect shower hose to handspray(3) and the water
supply.
The furriness or debris may cause flow stream distorted or reduce
the flowrate. To clean up the furriness or debris, run water through
the handspray, firmly press or rub your finger back and forth across
the rubber spray holes.
All Finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with
clean soft cloth. Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc.
which could adversely affect the finish and are not recommended for cleaning.
Do not use abrasive cleaners or solvents on Kohler handsprays and fittings.
1072929**
Multi-Function Handspray
(Only for 11615)
1096037**
Handspray
(Only for 10109)
1065970**
Handspray
(Only for 37432)
1030624
Water Flow Restrictor
**Color code must be specified when ordering.
1069818-2A-A
, put the washer(4, thickness
835700**
One-way Handspray
(Only for 16359)
1059039**
836979**
Multi-Function Performance
One-way Handspray
Handspray
(Only for 16365)
(Only for 16366)
4
1
2
835699**
Four-way Handspray
(Only for 16361)
1061670**
Multi-Function Performance
Handspray
(Only for 10377)
3
1
1111022**
Three-way Handspray
(Only for 16364)
831727**
Hose Assembly

Advertisement

loading

This manual is also suitable for:

163591636116364163653743216366 ... Show all