Related Manuals for ccei BRIO A300C
Summary of Contents for ccei BRIO A300C
- Page 1 BRIO-A300C 21/03/2011 BRIO A300C BRIO Led Light control system by PLC (Power Line Current) BRIO-A300C PF10R053 TECHNICAL INFORMATION V1.0 CCEI S.A. - 1 - V1.0...
-
Page 2: Table Of Contents
Power is supplied to the pool lights in TBTS 12V AC (Very Low Safety Voltage) compatible with Volume 0 (in the pool) in compliance with the Norm NF C 15-100. Always cut off the power upstream before handling the electrical installation. CCEI S.A. - 2 - V1.0... -
Page 3: Specifications
Safety cut-off A fuse, 5x20 T3, 15A integrated Description The kit comes in the form of a "BRIO A300C" box with a radio-frequency remote control. The CPL module offers many advantages for controlling your BRIO-WX line of lights. - Synchronising all the WX lights... -
Page 4: Audio Installation
Simply connect a male stereo plug into the audio jack found directly on the BRIO A300 C. Output use (Amplifier, speakers) Source Stereo jack splitter HI-FI BRIO-A300C Audio entry CCEI S.A. - 4 - V1.0... -
Page 5: Antenna Connection
The BRIO-A300C is designed to be used with an Output Headphone. Example of connection: Headphone jack Stand-alone speakers (on-board Splitter amp) player Antenna connection The supplied antenna fits easily into the BNC connector located on the top of the box. CCEI S.A. - 5 - V1.0... -
Page 6: Audio Installation
This is used to select a mode. « + » Key : This is used to change the function within a mode. Validate key : Is used to validate the entries. It also serves as ON/OFF switch. CCEI S.A. - 6 - V1.0... - Page 7 Remote control The module may also be remotely controlled using the provided radio-frequency control: Set colors run’s through ON /OFF (F1/F2/F3,…) Progran run through Audio mode (P1/P2/P3,…) selection/random (A1/H1) CCEI S.A. - 7 - V1.0...
-
Page 8: Antenna / Range
Reset It may be necessary to reset the unit if a malfunction occurs. To reset the BRIO A300C module to zero, use the following procedure: - Turn off the module (e.g., using its circuit breaker). - Press the Mode and “+” keys at the same time and hold them down. -
Page 9: Functioning Mode
Adaptif audio mode (blue when there is no sound) Blue Blue audio mode / cyan (OFF when there is no sound) Color changing has no cycle C= Chance Color changing has no cycle As above but with longer time between changes CCEI S.A. - 9 - V1.0...