The power supply of the bulb is 12V AC SELV (Safety Extra Low Voltage) compatible
with the volume 0 (inside the pool) in accordance with standard NF C 15-100.
The light must be immersed before the power is turned on and should never be fed
Always cut the power supply before handling the electrical installation.
Specifications
Dimensions
Power supply
Power consumption
Weight
Type of LEDs
Number of LEDs
Max Luminouxs Flux
Color control
Packing contents
1 bulb BRIO-WX-100
2 stainless steel screws + washers for connection
Instruction Manual (this document)
Brio WX-100_ENG
Brio
Color WX-100
®
Instruction Manual v2.0
Specifications ......................................................................................1
Packing contents ...............................................................................1
Description...........................................................................................1
Functions ..............................................................................................2
PLC Mode ..................................................................................... 2
Standalone Mode ....................................................................... 2
Safety....................................................................................................2
Installation............................................................................................3
Transformer ................................................................................... 3
Lights protection .......................................................................... 3
Cable Section .............................................................................. 3
Connection Diagram.........................................................................3
WARNING
out of water.
1
BRIO WX
PAR-56 Power Led Bulb
PAR-56
12 V AC 50Hz/60Hz
100W
2 kg
POWER LED RVB P5W
18
2000 lm
CPL or ON/OFF
Instruction Manual v2.0