Technical instructions Mini Brio X15CA v1.0EN 2. Technical features Sizes Ø 47 mm (1-11/16in) / length 84mm (3-5/16in) Installation Only in a threaded 1.5" niche ref. PF10R191 or PF10R192 Power supply 12 V ~ (AC) 50Hz/60Hz Power consumed 12W maximum (according to colour)
Technical instructions Mini Brio X15CA v1.0EN 4. Use - Autonomous mode In the absence of a control unit, the projectors operate autonomously and the user can choose between 18 modes: 11 set colours and 7 programmes; Mode Type Description Set colour...
Technical instructions Mini Brio X15CA v1.0EN 6. Installation 6.1. Wall through installation 6.1.1. Fiberglass pool Prior to installing, drill a hole in the pool using a 60-mm (2 3/8-in) diameter cylinder saw. The wall through is connected on the rear to a 1,5" threaded coupling.
Page 7
Technical instructions Mini Brio X15CA v1.0EN 6.1.2. Concrete pool Assemble a pipe of sufficient length with a 1,5" threaded coupling onto the wall through before sealing the assembly. www.ccei.ca...
Page 8
Technical instructions Mini Brio X15CA v1.0EN 6.1.3. Concrete + liner pool Assemble a pipe of sufficient length with a 1,5" threaded coupling onto the wall through before sealing Then glue a first gasket before placing the liner ; www.ccei.ca...
Page 9
Technical instructions Mini Brio X15CA v1.0EN 6.1.4. Panels + liner pool Prior to installing, drill a hole in the pool using a 80-mm (3 1/8-in) diameter cylinder saw. Think to glue the first liner gasket before installing it. The wall through is connected on the rear to a pipe with a 1,5" threaded coupling.
Mini Brio X15CA v1.0EN 6.2. Placement in a wall BRIO Mini Brio X15CA LED projectors must only be installed in a threaded 1.5" niche ref. PF10R191 or PF10R192. We recommend that installation is performed by a professional. 6.2.1. In wall through 1.
Once startup and the operation tests are complete, it is recommended to drown the connection with a reusable soft hydrophobic insulating gel. (ref. CCEI PNSP0002) The soft external cable of this lighting system cannot be replaced. If this cable is damaged, the lighting system must be disposed of or returned to the manufacturer for possible reconditioning.
Mini Brio X15CA v1.0EN A. Declaration of Conformity The Company CCEI Inc. (Québec 1170122155) declares that the product Mini Brio X15CA satisfies the safety and electromagnetic compatibility requirements of Euro- pean directives 2006/95/EC and 2004/108/EC and is UL listed under file E471596.