Canon B160 User Manual page 125

Message
NOT AVAILABLE
PUT IN CARTRIDGE
REC'D IN MEMORY
SET DOCUMENT
TX/RX CANCELLED
TX/RX NO. nnnn
TX/RX NO. nnnn
SCANNING P . nnn
MEMORY FULL
(Three messages
toggle.)
WAIT COOLING
9-22
Error Code Cause
– In manual sending, you
entered a speed dialling
number under which a
group is registered.
– There is no BJ cartridge
installed in the fax.
– The fax received the
document in memory
because paper or ink ran
out, a paper jam
occurred, or the
incorrect BJ cartridge
was installed.
– The document is not set
correctly or at all.
– You pressed [Stop] to
cancel the transmission.
– When the fax sends or
receives a document, it
assigns it a unique
identification number
( nnnn ).
– The fax is sending a
document and its
memory is full.
– During printing, the BJ
cartridge print head may
have become too hot.
Action
Use regular dialling, or
enter a one-touch speed
dialling button or coded
speed dialling code that
only has one fax/
telephone number
registered.
Install the BJ cartridge.
(see p. 1-9)
Load paper in the multi-
purpose tray
(see p. 1-12), replace
the BJ cartridge
(see p. 9-8) or clear the
paper jam (see p. 9-3).
Set or re-set the
document.
If required, try sending
again.
Write the number down
if you will need it later.
The fax continues to
send the document as
memory becomes
available.
Allow the fax to cool
down. The fax will
resume printing when it
has cooled down.