Canon B160 User Manual page 123

Message
CHECK PRINTER
(Continued)
CLEAR PAPER JAM
COLOUR INK EMPTY
(FAX-B180C only)
DATA ERROR
DOC. TOO LONG
ECM RX
9-20
Error Code Cause
– The BJ cartridge may be
defective.
– The waste ink tank
(which holds the ink
expelled during print
head cleaning) may be
full.
– There is a paper jam.
– The Colour BJ tank in
the Colour BJ cartridge
is empty or its ink may
have dried out.
– An error has occurred
and all one-touch speed
dialling, coded speed
dialling, and user data
has been lost.
#003 The document is longer
than 1 metre.
– The fax is receiving a
document using Error
Correction Mode (ECM).
Action
Press [Start]. Reinstall
the BJ cartridge
(see p. 1-8) and start
again.
In either case, if the
error does not clear, try
unplugging the fax. Wait
several minutes, then
plug it back in. Also, try
replacing the BJ
cartridge with a new
one.
(see p. 9-8)
Contact your local
authorised Canon dealer
or the Canon Help Desk
to have the waste ink
tank replaced
immediately.
Clear the paper jam (see
p. 9-3) and reload paper
in the multi-purpose tray.
Press [Start].
Clean the BJ cartridge
print head (see p. 9-8).
If the message remains
in the LCD, replace the
Colour BJ tank.
(see Printer Guide)
Press [Set], then re-
register the data.
(see Chapter 2)
Use a copier to make a
reduced copy of the
document and then send
the copy.
ECM receptions may
take longer than normal
receptions. Turn off ECM
if you need to receive
quickly, or if you know
your local lines are in
good condition. (see
ECM RX, p. 8-5)