3. FEATURES
Main hardware features
●
PCI EXPRESS
TM
x 1 ( PCIe
●
2 Gigabit Ethernet RJ45 ports for RAVENNA I/O (dual port or Primary / Backup mode)
●
1 optional optical connector for MADI I/O (Factory option)
●
1 BNC for Word Clock In or Out
●
Sampling frequency:
From internal clock: 44.1 kHz, 48 kHz and 96 kHz (MADI)
From network or Word Clock: 44.1 kHz, 48 kHz and 96 kHz (MADI)
From MADI: 44.1 kHz, 48 kHz, 96 kHz
●
Routing: zero latency onboard routing matrix between Audio Over IP channels, Digital Audio Workstation
playback and record channels, and optional MADI channels
3.2. Main software features (PC side)
●
Low latency WDM DirectSound, ASIO , and Alsa drivers.
●
Card can be used through the following programming interfaces (APIs): DirectSound kernel streaming,
DirectSound, WASAPI, ASIO, Alsa.
●
32 stereo DirectSound playback devices / 32 stereo DirectSound recording devices
●
64 mono ASIO playback channels / 64 mono ASIO recording channels
●
64 mono Alsa playback channels/ 64 mono ASIO recording channels
●
Realtime, simultaneous record and playback in PCM (16 and 24 bits) of 64 mono I/O channels
●
Embedded WEB server for IP audio configuration
3.3. RAVENNA features
●
Up to 128/128 I/O (Mono) channels at 44.1 kHz or 48 kHz (64/64 I/O on each Gigabit Ethernet interface)
●
Packet size from 128 down to 1 (ultralow latency profile) audio samples per RAVENNA packet
●
Full compliance in all respects with AES 67 (excepted SIP).
●
PCM16 / PCM24 / PCM32 / AM824 (PCM24+AES3 channel status)
●
PTPv2 (IEEE15882008) from network or internal clock or Word Clock or MADI input
●
Local clock eligible as GrandMaster PTP
●
Local clock precision : better than 10 ppm
4. REQUIREMENTS
4.1. Minimum hardware requirements
●
PC with one free PCI Express slot (x1, x2, x4, x8, x16).
●
Required CPU power and memory depend on the operating system and on the software applications used.
®
) bus, compatible with PCIe
LXIP
u ser Manual v1.04
®
x1, x4, x8 or x16 slots.
5
Need help?
Do you have a question about the LX--IP and is the answer not in the manual?