Digigram LX--IP User Manual page 17

The presence of the recording DirectSound devices can
be checked from the Windows "Sound" control panel, in
the "Record" Tab.
Under Windows Seven and 8, the name of a device can
be modified by right clicking on its name, and selecting
"Properties".
Installation troubleshooting
If the LX­IP card is not listed in the LX­IP tab
● Please check from the Windows Device Manager if the card is detected by the operating system.
● Right click on the icon "My computer" (from the Desktop, or from the Windows file browser).
● Select "Manage", and "Device Manager".
● The LX­IP card should be listed in the "Sound, video and game controller" section.
● If there is an exclamation mark in front of the card, this means that the driver is not installed correctly.
Remove the LXIP Kit driver from the Windows Control Panel, Add/Remove programs, and install it again.
● If it is not listed, check in the "Other devices" section of the "device Manager".
If the card is not listed at all in the "Device Manager"​ , proceed as follows:
● Shut down the computer and remove the LX­IP card.
Please be careful with electrostatic discharge when handling the card ​ ( read section "Information for the user"
of this document for more information) ​ .
● Make sure the golden tracks of the LX­IP card PCI Express interface are clean; if not, you may use a dry rag
to clean them.
● If there is another free PCI Express slot, insert the card in it, and power on the computer.
● Check again if the card is detected as described above.
● If the card is not detected in any PCI Express slot of this computer, you may try it in another computer.
● If the card is not detected, please contact your card supplier.
LX­IP ​
u ser Manual v1.04
16