Report Settings - Canon B150 User Manual

SETTINGS AND ACTIVITY REPORTS
Name
TEL LINE TYPE*
PSTN/PBX SET
PSTN
PBX
M-KEY SETTING (UK
only)
ACCESS CODE
ID CODE
*TEL LINE TYPE cannot be set in HongKong, Norway and Denmark.
**TOUCH TONE is the default setting in the UK and Singapore.

REPORT SETTINGS

Factory settings are in bold. For instructions on how to change a setting, refer to How to change a
setting, pp. 81, 82.
Name
TX REPORT
TX CONFIRM REP.
RX REPORT
ACTIVITY REPORT
TX/RX SEPARATE
84
Description
Set the dialling method the fax uses to match the type of
phone line you have.
Sets the type of the PBX through which your fax is
connected.
Your fax is connected to the outside line.
Your fax is connected through a PBX.
You can set the type of the PBX among PREFIX, HOOKING
and EARTH CONNECTION. If you select PREFIX, you can
set the number up to 19-digits that will access the outside
line.
If set to PBX, the [05] button cannot be used for One-touch
Speed Dialling.
Enable/disable the M-key setting. When set to ON, the [10]
button cannot be used for One-touch Speed Dialling.
Set an access code and ID code for the 2300 service of
Mercury Communications Limited, p. 42.
Set an access code up to 19 digits.
Set an ID code up to 19 digits.
Description
Enable/disable automatic printing of the transmission
report.
PRINT ERROR ONLY prints only when a transmission error
occurs.
OUTPUT YES sets the fax to print an activity report every
time you send a document.
OUTPUT NO turns off the activity report feature.
When you set TX REPORT to OUTPUT YES or PRINT
ERROR ONLY, you can add to the TX report half of the first
page of the document that was being sent. This can help
remind you which document was being sent. Valid only for
memory transmissions.
Enable/disable automatic printing of the reception report.
PRINT ERROR ONLY prints only when an error occurs
during receiving.
OUTPUT YES sets the fax to print an activity report every
time you receive a document.
OUTPUT NO turns off the activity report feature.
Enable/disable automatic printing of the activity report.
Unless you change the setting, your fax is set to print
anactivity management report for every 20 transactions
(sending and receiving).
Divide the activity management report into sending and
receiving transactions.
Settings
TOUCH TONE/ROTARY PULSE**
PSTN/PBX
ON/OFF
-
-
Settings
OUTPUT YES/OUTPUT NO/
PRINT ERROR ONLY
OUTPUT YES/OUTPUT NO
OUTPUT YES/OUTPUT NO/
PRINT ERROR ONLY
OUTPUT YES/OUTPUT NO
ON/OFF