Settings
The fax has seven sets of settings that control its various modes of operation.
The settings and how to change them are described below.
How to change a setting
There are two basic types of settings, selectable settings and numeric entry settings. The following
example shows how to make both types of changes.
Whenever you make a change to a setting, press [START/COPY] and confirm that DATA ENTRY OK
displays on the LCD. Unless this message displays, the setting has not been changed.
Example:
Changing INCOMING RING, the number of rings before the fax
answers.
1
Press [FUNCTION].
Wait a second for TEL REGISTRATION to
appear.
2
Use [
] or [
] to select RX SETTINGS.
3
Press [START/COPY].
4
Use [
] or [
] to select INCOMING RING.
5
Press [START/COPY].
FUNCTION
SELECT MENU
TEL REGISTRATION
RX SETTINGS
START/COPY
ECM RX
INCOMING RING
START/COPY
1 sec.
OFF
7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
81