Canon B150 User Manual page 123

Message
CHECK PRINTER
DOC. TOO LONG
HANG UP PHONE
MEMORY FULL
MULTI TRANS. ON
NO RX PAPER
NO TEL #
Error Code Cause
- An error occurred in the
printer.
#003 It took more than 32
minutes to send or copy a
document.
It took more than 32
minutes to receive a
document.
The document is longer than
1 m.
- The handset is off hook.
#037 The memory of the fax is full
because it has received too
many documents.
The memory is full because
you tried to send too many
pages at once.
- Sequential broadcasting is
in progress, with a pause
between calls.
#012 The other party's fax is out
of paper.
#022
The One-touch Dialling or
Coded Speed Dialling
number has not been
registered.
ERROR CODES, MESSAGES AND SOLUTIONS
Action
Press [STOP]. Try your
operation again.
Divide the document and
send or copy each part
separately.
Contact the other party. Have
them divide the document
and send each part
separately.
Use a copy machine to make
a reduced copy of the
document and send the copy.
Place the handset properly
into its cradle.
Print out any documents that
are stored in memory. Then
start the operation again (See
p. 72)
Divide the documents and
send each part separately.
If you want the fax to
continue, do nothing. If you
want to stop sending, wait
until the fax starts to dial the
number, then press [STOP].
Contact the other party and
have them install paper in
their fax.
Register the number. (See pp.
36, 38)
8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8
111