Receiving A Still Image (Dcr-Trv80E Only) - Sony DCR-TRV80E Operating Instructions Manual

Network function/application
Hide thumbs Also See for DCR-TRV80E:
Table of Contents

Advertisement

Available languages

Available languages

Messages
Receiving a still image
– DCR-TRV80E only
Message
Input at Least One Letter
Error Receiving
Cause and/or Corrective Actions
Enter the passkey between one to 16 characters.
• Disconnected from the connected Bluetooth device.
c After confirming the connection to the Bluetooth device, receive the
still image again.
• The radio waves between your camcorder and the connected device
were blocked while receiving still images.
c Confirm the radio wave condition, and receive the still image to the
device again.
• The distance between your camcorder and the connected device
become too far to communicate each other while receiving still
images.
c The distance that your camcorder and the connected device is
within about 10 m (33 feet). Put your camcorder and the connected
device within the distance that they can communicate each other.
137
-GB

Advertisement

Chapters

Table of Contents
loading

Table of Contents