Sony DCR-TRV80E Operating Instructions Manual page 118

Transferring still images with Bluetooth function
– Image Transport
(7) Tap the Bluetooth device that you want to send a still image to.
(8) Tap [OK].
(9) Tap [OK].
Viewing the history
(1) Set the POWER switch of your camcorder to MEMORY/NETWORK.
(2) Tap FN and select PAGE3.
(3) Tap IMAGE TRANS.
(4) Tap LOG.
Tip
When you tap [More Info.], the device address and the device category appear on the
screen. To return to the previous screen, tap [More Info.] again.
118
-GB
Your camcorder starts sending the still image. If the Bluetooth authentication is
required, tap [Passkey] and enter the passkey within 30 seconds.
The screen in step 5 appears again.
The history of up to 10 most recently used Bluetooth devices appears.
,