Troubles About Sending A Still Image (Dcr-Trv80E Only) - Sony DCR-TRV80E Operating Instructions Manual
Network function/application
Hide thumbs
Also See for DCR-TRV80E:
- Operating instructions manual (300 pages) ,
- Operating instructions manual (224 pages)
Table of Contents
Advertisement
Available languages
Available languages
Troubleshooting
Troubles about sending a still image
– DCR-TRV80E only
SEND does not function.
c
A still image is not being played back.
c
An invalid image is being played back.
The message "Bluetooth Authentication Error" appears, and you cannot send a still image.
c
The authentication time limit (30 seconds) is over.
c
You did not enter the correct passkey.
c
The connected device was disconnected.
c
The passkey you entered is wrong. Enter the correct passkey.
The message "Bluetooth Connection Error" appears, and you cannot send a still image.
c
The Bluetooth device you want to connect to is not turned on.
c
The Bluetooth device is too far from your camcorder.
c
The radio waves between your camcorder and the connected device were blocked.
c
The Bluetooth device you want to connect to is already connected to other devices.
c
The connected device was disconnected.
c
The Bluetooth device you want to connect to is not compatible with BIP.
The message "Bluetooth Communication Disconnected" or "Send Error" appears, and you
cannot send a still image.
c
The connected Bluetooth device is turned off.
c
The Bluetooth device is too far from your camcorder.
c
The radio waves between your camcorder and the connected device were blocked.
c
The connected device was disconnected.
c
The Bluetooth device you want to connect to is not compatible with BIP.
c
The connection was rejected by the connected Bluetooth device. Check the settings or
operations of the connected device.
c
You sent the still image that the connected Bluetooth device cannot receive.
127
-GB
Advertisement
Chapters
Table of Contents
