Weider 230 User Manual page 7

3. Attach the other Stabilizer (4) to the Rear Leg (3)
with two M10 x 63mm Carriage Bolts (18) and two
M10 Nylon Locknuts (19). Do not tighten the
Nylon Locknuts yet.
Attach the Rear Leg (3) to the Frame (1) with two
M10 x 20mm Bolts (25) and two M10 Washers
(20).
See steps 1–3. Tighten the M10 Nylon Locknuts
(19).
4. Insert a Pad Tube (10) into the Front Leg (2). Wet
the ends of the Pad Tube with soapy water, and
slide two Foam Pads (9) onto the Pad Tube.
Repeat this step with the other Pad Tube (10).
5. Attach the Pivot Bracket (6) to the Backrest
Frame (5) with two M10 x 70mm Bolts (26) and
two M10 Nylon Locknuts (19). Do not tighten the
Nylon Locknuts yet.
Insert the Pivot Bracket (6) into the slot in the
Frame (1).
All manuals and user guides at all-guides.com
7
3
18
4
19
4
10
9
5
5
26
1
19
1
3
20
25
9
2
10
19
6
Slot