Canon VB-C10 User Manual page 97

Glimpse
Parameter Name Omissible
comment Yes
hostname Yes
show_counter Yes
show_hostname Yes
sleep Yes
url No
auto_connect Yes
connect_msg Yes
disconnect_msg Yes
error_msg Yes
font_size Yes
no_connect_msg Yes
This parameter specifies the comment text string displayed as an overlay on the
applet. If this parameter is omitted, no comment is displayed.
This parameter specifies the host name displayed in the applet (alphanumeric
character only). This value is used as the host name in messages displayed
during connection, etc. If this parameter is omitted, no host name is displayed.
This function displays the frame count as an overlay on the video image. Specify
"on" or "off". The default value is "off".
This function displays the host name as an overlay on the video image. Specify
"on" or "off". The default value is "off". Note that this parameter is only valid if the
"hostname" parameter is specified.
This parameter specifies the interval (in milliseconds) at which the screen is
updated. If this parameter is omitted, the screen is updated at 5-second intervals.
Because the Glimpse applet is designed to be used for displaying multiple sites
as a list, this parameter is provided as a means of reducing the processing load.
Intervals between 0 and 300,000 ms (5 minutes) can be set. If 0 is specified, the
interval is not adjusted.
Specify the URL of the HTTP server for applet access. Specify the IP address
and port number that match those specified in the codebase attribute.
Specifies whether or not connection to the camera server should be established
simultaneously with applet startup. Specify either "on" or "off". When "on", a
connection is established simultaneously with applet startup; when "off", no
connection is established when the applet starts up and the character string
specified for no_connect_msg is displayed. The connect() method is called up in
order to make connections..
Specifies the character string to be displayed while a connection to the camera
server is being established. The default is "now connecting".
Specifies the character string to be displayed when a connection to the camera
server is disconnected. The default is "disconnected".
Specifies the character string to be displayed when an attempt to connect to the
camera server has failed. The default is "can't connect".
Specifies the font size for connect_msg, disconnect_msg, error_msg, and
no_connect_msg when these messages are displayed. The default is to depend
on the display area.
Specifies the character string to be displayed after the applet starts up, if "off" is
specified for auto_connect. The default is "no connection".
Using the Java Viewer to Distribute Videos
Description
5-19