Preset Settings Page - Canon VB-C10 User Manual

Preset Settings Page

Use this page to specify the settings for preset camera positions provided to viewers.
Using VB Administration Tools is a convenient way to set presets (→ P.4-17).
Click the "OK" button to change the settings. To discard the changes, click the "Cancel"
button. This returns you to the settings title page.
Changes in presets are not applied in the viewer while it is connected.
Note
Presets can be set visually and more easily from the VB Administration Tools. Please
use the VB Administration Tools for making settings (→ P.4-17).
Tip
Common Settings
"Restrict Camera Control to Presets"
VB-C10/VB-C10R camera control using Helper Viewer and
Java Viewer can be restricted to the preset angle only.
Presets 1-8
Up to 8 presets can be specified.
"Application"
Use these options to specify whether this preset can be used
only for picture recording (→ P.3-16) or is also made available
in WebView Livescope Viewer. If it is also provided in
WebView Livescope Viewer, always specify the preset name.
"Preset Name"
Enter a name consisting of up to 15 alphanumeric
characters.
"Camera Parameter"
Enter the center angle between the angles you want to set
for Pan and Tilt. Enter the viewing angle for zoom.
"Pan"
Sets the pan position for the camera.
"Tilt"
Sets the tilt position for the camera.
"Zoom"
Sets the value for the camera's angle of zoom.
"Brightness"
Sets the target value for the camera's auto exposure
feature. Select "Brighter" if the picture is darker due to
backlight or other factor.
Detail Settings
3-15