Canon VB-C10 User Manual page 98

Using the Java Viewer to Distribute Videos
Applet Tag Descriptions
Attribute Name Omissible
code
codebase
width
height
archive
When specifying an address included in the codebase attribute of the applet tag and
a URL parameter of the applet, specify one that can be accessed from the client's
Tip
computer. This is particular necessary when using NAT.
5-20
This parameter specifies the applet file name. Enter "LiveApplet.class" or
No
"Glimpse.class". If this parameter is not specified correctly, the applet (LiveApplet
or Glimpse) is not downloaded.
This parameter specifies the directory that contains the applet.
http://HTTP server IP address: port number/directory/
If this parameter is not specified correctly, the applet (LiveApplet or Glimpse) is
No
not downloaded.
Directories are fixed for each applet.
Directory (LiveApplet)=-wvdoc-01-/LiveApplet
Directory (Glimpse)=-wvdoc-01-/Glimpse
This parameter specifies the size of the area acquired for the applet (in pixels).
For LiveApplet, if the value specified is smaller than the LiveApplet drawing area,
the applet may not be displayed correctly. If the camera control function GUI is to
be added (controller_style=normal), add about 130 to the value.
No
Eg. For an image size of 320 × 240, width=450.
For Glimpse, because the areas used for the applet and for the video display are
the same size, specify the same value as the image width.
Eg. For an image size of 320 × 240, width=320.
As for width. For LiveApplet, add around 140.
Eg. For an image size of 320 × 240, height=380.
No
For Glimpse, specify the same value as the image height.
Eg. For an image size of 320 × 240, height=240.
Yes Specify LiveApplet.zip or Glimpse.
Description