Table of Contents
Advertisement
Before Using the VB-C10/VB-C10R
Installing the VB-C10/VB-C10R
VB-C10 Installation
Install in a flat and stable location.
a WARNING:
Install the camera securely.
● When installing the VB-C10R on the ceiling, contact your Canon dealer.
● When installing the VB-C10R on the ceiling, check that the ceiling is strong enough to
bear the weight of the VB-C10R including the mounting plate. Installation in a weak location
could result in the VB-C10R falling and causing serious injury.
● At least once a year, check for looseness in the camera installation mount. (If the optional
wide-angle converter is used, check the converter mount also.)
● The permissible camera installation angles are ±20° from the horizontal. (±15°
when the optional wide-angle converter is used for the VB-C10.)
Note
● The MAC address required when making network settings is shown on the bottom of
the VB-C10/VB-C10R (→ P.1-11). Please make a note of it before installing this unit
(→ P. 3-3).
Using a Tripod (VB-C10)
The screw for mounting a tripod is on the bottom of the VB-C10 toward the front.
● Do not overtighten the mounting screw.
If excessive force is used to tighten the mounting
Note
screw, camera head movement may be impeded,
or other malfunctions may result.
● Always use a tripod mounting screw that is less
than 6.0 mm (
6.0 mm (
camera. Also, the tripod seat used should be at
least 30 mm (1
2-2
1
/
in.) in length. The use of screws
4
1
/
in.) long or longer could damage the
4
3
/
in.) in diameter.
16
VB-C10R Installation
Firmly tighten the 2 screws (not supplied).
Mounting plate
Screw
(Installation)
• Distance between tapped holes: 120 mm (4
• Tapped hole diameter: 6.0 mm (
• Mounting plate thickness: 1.6 mm (
VB-C10R
Screw
18
/
1
/
in.)
4
1
/
in.)
16
30 mm
Less than
3
(1
/
in.)
6.0 mm
16
1
or wider
(
in.)
25
/
in.)
4
Mounting
screw
Hide quick links:
Advertisement
Table of Contents
