10.1.13 Ordering Information; 10.1.14 Documentation - Endress+Hauser Proline Prosonic Flow 93 PROFIBUS DP/PA Operating Instructions Manual

Technical data
Other standards and
guidelines
162
• EN 60529
Degrees of protection provided by enclosures (IP code).
• EN 61010-1
Safety requirements for electrical equipment for measurement, control and laboratory use.
• IEC/EN 61326
"Emission in accordance with Class A requirements".
Electromagnetic compatibility (EMC requirements).
• ANSI/ISA-S82.01
Safety Standard for Electrical and Electronic Test, Measuring, Controlling and Related
Equipment - General Requirements. Pollution Degree 2, Installation Category II.
• CAN/CSA-C22.2 No. 1010.1-92
Safety Requirements for Electrical Equipment for Measurement and Control and Laboratory Use.
Pollution Degree 2, Installation Category II.
• NAMUR NE 21
Electromagnetic compatibility (EMC) of industrial process and laboratory control equipment.
• NAMUR NE 43
Standardization of the signal level for the breakdown information of digital transmitters with
analog output signal.
• NAMUR NE 53
Software of field devices and signal-processing devices with digital electronics.

10.1.13 Ordering information

The Endress+Hauser service organization can provide detailed ordering information and
information on the order codes on request.

10.1.14 Documentation

• Flow measurement (FA005D)
• Technical Information for Promass Flow 93P (TI083D)
• Technical Information for Prosonic Flow 93W (TI084D)
• Description of Device Functions for Prosonic Flow 93 PROFIBUS DP/PA (BA077D)
• Supplementary documentation on Ex-ratings: ATEX, FM, CSA, IEC, NEPSI
Proline Prosonic Flow 93 PROFIBUS DP/PA
Endress+Hauser