Table of Contents
Advertisement
NOTE:
These features will stay on through the duration
of Remote Start until the ignition is placed in the
ON/RUN position. The climate control settings will
change, and exit automatic operation, if manually
adjusted by the driver while the vehicle is in
Remote Start mode. This includes the OFF button
on the climate controls, which will turn the system
off.
R
S
W
EMOTE
TART
INDSHIELD
D
-I
A
— I
E
E
CER
CTIVATION
F
When the Remote Start system is active and the
outside ambient temperature is less than 33°F
(0.6°C), the Windshield Wiper De-Icer will activate.
Exiting Remote Start will resume its previous
operation. If the Windshield Wiper De-Icer was
active, the timer and operation will continue.
R
S
C
M
EMOTE
TART
ANCEL
ESSAGE
The following messages will display in the
instrument cluster if the vehicle fails to Remote
Start or exits Remote Start prematurely:
Remote Start Cancelled — Door Open
Remote Start Cancelled — Hood Open
Remote Start Cancelled — Fuel Low
Remote Start Cancelled — Liftgate Open
Remote Start Cancelled — Too Cold
Remote Start Cancelled — Time Expired
Remote Start Disabled — Start Vehicle To Reset
The message will stay active until the ignition is
placed in the ON/RUN position.
VEHICLE SECURITY SYSTEM — IF EQUIPPED
The Vehicle Security system monitors the vehicle
doors for unauthorized entry and the ignition
switch for unauthorized operation. When the alarm
W
IPER
is activated, the interior switches for door locks,
QUIPPED
power sliding doors and power liftgate are
disabled. The Vehicle Security system provides
both audible and visible signals. If something
triggers the alarm, the Vehicle Security system will
provide the following audible and visible signals:
the horn will pulse, the park lamps and/or turn
signals will flash, and the Vehicle Security Light in
the instrument cluster will flash.
T
A
T
O
RM
HE
Follow these steps to arm the Vehicle Security
system:
1. Make sure the vehicle's ignition is placed in
the OFF position.
For vehicles equipped with Keyless Enter 'n
Go™ — Passive Entry, make sure the vehicle
ignition system is OFF.
S
YSTEM
GETTING TO KNOW YOUR VEHICLE
2. Perform one of the following methods to lock
the vehicle:
Push lock on the interior power door lock
switch with the driver and/or passenger
door open.
Push the lock button on the exterior Passive
Entry door handle with a valid key fob avail-
able in the same exterior zone
Push the lock button on the key fob.
3. If any doors are open, close them.
T
D
T
S
O
ISARM
HE
YSTEM
The Vehicle Security system can be disarmed using
any of the following methods:
Push the unlock button on the key fob.
Grab the Passive Entry door handle (if equipped)
page 21.
Ú
Cycle the vehicle ignition system out of the OFF
position.
For vehicles equipped with Keyless Enter 'n
Go™ — Passive Entry, push the keyless igni-
tion START/STOP ignition button (requires
at least one valid key fob in the vehicle).
19
2
page 21.
Ú
Advertisement
Table of Contents
