Yamaha WR125R 2009 Service Manual page 69

1. Tail/brake light
2. License plate light
3. Neutral switch lead
4. Sidestand switch lead
5. Crankshaft position sensor/stator coil lead
6. Ground lead
7. Sidestand switch
8. Neutral switch
9. ECU (engine control unit)
10. Generator cover
11. Drive sprocket cover
A. Fasten the neutral switch lead, crankshaft position
sensor/stator coil lead, sidestand switch lead, and
ground lead with a plastic locking tie.
B. Fasten the sidestand switch lead with the holder
on the drive sprocket cover.
C. Fasten the sidestand switch lead at the white tape
to the frame with plastic locking tie.
D. Route the neutral switch lead between the
generator cover and the drive sprocket cover.
2-44
CABLE ROUTING