Instrument Functions - Yamaha WR125R 2009 Service Manual

EAS22B1038

INSTRUMENT FUNCTIONS

Multi-function display
EWA22B1019
WARNING
Be sure to stop the vehicle before making
any setting changes to the multi-function
display. Changing settings while riding can
distract the operator and increase the risk of
an accident.
2
1. Multi-function display
2. "RESET/SELECT" button
The multi-function display is equipped with the
following:
• a speedometer
• an odometer
• two tripmeters (which show the distance trav-
eled since they were last set to zero)
• a fuel reserve tripmeter (which shows the dis-
tance traveled since the fuel level warning light
came on)
• an oil change indicator (which flashes when
the engine oil should be changed)
• a fuel meter
TIP
• Be sure to turn the key to "ON" before using the
"RESET/SELECT" button.
• When the key is turned to "ON", all segments
of the display come on for a few seconds. Dur-
ing this time, the multi-function display is per-
forming a self-test.
• For the U.K. only: To switch the speedometer
and odometer/tripmeter displays between kilo-
meters and miles, press the "RESET/SELECT"
button for at least eight seconds.
1
1-4
Odometer and tripmeter modes
A brief push (less than one second) on the "RE-
SET/SELECT" button switches the display be-
tween the odometer mode "ODO" and the
tripmeter modes "TRIP 1" and "TRIP 2" in the fol-
lowing order:
ODO → TRIP 1 → TRIP 2 → ODO
When approximately 1.6 L (0.42 US gal, 0.35
Imp.gal) of fuel remains in the fuel tank, the
odometer display will automatically change to
the fuel reserve tripmeter mode "F-TRIP" and
start counting the distance traveled from that
point, and the last segment of the fuel meter will
start flashing. In that case, pushing the "RE-
SET/SELECT" button switches the display be-
tween the various tripmeter and odometer
modes in the following order:
F-TRIP → TRIP 1 → TRIP 2 → ODO → F-TRIP
To reset a tripmeter, select it by pushing the
"RESET/SELECT" button briefly (less than one
second), and then push the button again for at
least three seconds. If you do not reset the fuel
reserve tripmeter manually, it will reset itself au-
tomatically and the display will return to the prior
mode after refueling and traveling 5 km (3 mi).
Oil change indicator
1. Oil change indicator "OIL"
This indicator flashes at the initial 1000km
(600mi), then at 3000km (1800mi) and every
3000km (1800 mi) thereafter to indicate that the
engine oil should be changed.
After changing the engine oil, reset the oil
change indicator.
TIP
The oil change indicator can only be reset when
"OIL" flashes in the multi-function display.
To reset the oil change indicator, select it by
pushing the "RESET/SELECT" button briefly
(less than one second), and then pushing the
button again for at least five seconds. When the
FEATURES
1