Installing A Security Cable; Turning On The Monitor - HP Z27xs G3 User Manual

Hide thumbs Also See for Z27xs G3:

Table of Contents

Pivot the monitor clockwise or counterclockwise 90° from landscape to portrait orientation (2).

IMPORTANT:

right corner of the monitor panel will come in contact with the base and potentially cause damage

to the monitor.

If you are adding an optional speaker bar to the monitor, install it after pivoting the monitor. The

speaker bar will come in contact with the base when the monitor pivots and potentially cause

damage to the monitor or speaker bar.

NOTE:

portrait to landscape. To rotate the OSD from landscape to portrait, open the OSD menu and select

Menu, select Menu Rotation, and then choose a setting from the options.

Installing a security cable

As a security measure, you can secure the monitor to a fixed object with an optional security cable available

from HP. Use the key provided to attach and remove the lock.

This section provides important information about preventing damage to your monitor, startup indicators,

and troubleshooting information.

If the monitor is not in full height and full tilt position when pivoting, the bottom

Use the operating system's display settings to rotate the image on the screen from

Setting up the monitor

Table of Contents