Installing A Security Cable; Turning On The Monitor - HP QHD User Manual

b. Pivot the monitor clockwise or counterclockwise 90° from landscape to portrait orientation (2).
IMPORTANT:
right corner of the monitor panel will come in contact with the base and potentially cause damage
to the monitor.
If you are adding an optional speaker bar to the monitor, install it after pivoting the monitor. The
speaker bar will come in contact with the base when the monitor pivots and potentially cause
damage to the monitor or speaker bar.
NOTE:
portrait to landscape. To rotate the OSD from portrait to landscape, open the OSD menu and select
Image Adjustment, select On-Screen Menu Rotation, and then select Portrait.

Installing a security cable

Use the key that came with the optional security cable to attach and remove the lock.

Turning on the monitor

This section provides important information about preventing damage to your monitor, startup indicators,
and troubleshooting information.
If the monitor is not in full height and full tilt position when pivoting, the bottom
Use the operating system's display settings to rotate the image on the screen from
Setting up the monitor 15