Kohler K-1098 Installation Manual page 18

Apply plumbers
putty.
14. Install the Showerhead
CAUTION: Risk of product damage. To avoid plugging the
showerhead spray outlets, use thread sealant tape on the shower
arm threads. Do not use thread sealant compound (pipe dope).
Remove the temporary nipple.
Apply a bead of plumbers putty or other sealant to the
escutcheon according to the manufacturer's instructions.
Slide the escutcheon over the shower arm.
Apply thread sealant on the shower arm threads and thread the
shower arm into the elbow.
Tighten with a clean strap wrench. Do not overtighten.
Flush the system for one minute.
Apply thread sealant to the shower arm threads, and thread the
showerhead onto the shower arm. Tighten securely.
Remove all excess putty.
For three-way showerhead operation, grasp the outer ring of the
showerhead, and gently rotate clockwise or counterclockwise.
There are two small detents within the outer ring to provide the
three operating positions.
114542-2-BC
Elbow
Escutcheon
Setscrew
Showerhead
18 Kohler Co.