Kohler K-1098 Installation Manual page 14

Gasket
Escutcheon
Valve Stem
10. Install the Handle Escutcheons
Position the gasket on the bottom of the escutcheon, and thread
the escutcheon onto the valve body.
Tighten the valve locknut.
Position the spline adapter onto the valve stem.
Set the handle stem/skirt over the valve, and secure to the valve
stem with the lockwasher and screw.
Align the eyelets in the handle stem/skirt so they point toward
the other handle, and are parallel to the back edge of the finished
wall.
Use a 5/32" hex wrench to tighten.
114542-2-BC
Escutcheon
Spline
Adapter
Handle Stem/Skirt
14
Screw
Lockwasher
Kohler Co.