Kohler K-1098 Installation Manual page 16

Handle Stem
Valve
Stem
Screw
Skirt
O-Ring
Escutcheon
Assembly
Plug Button
12. Install Handles - K-1099
Remove and discard the plaster guard, if installed.
Rotate the valve stem fully counterclockwise.
Position the handle stem over the valve stem with the eyelets
vertical, and secure with a screw.
Slide the skirt (with O-ring installed) over the handle stem and
onto the shoulder of the valve. Secure with a setscrew.
Slide the escutcheon assembly over the skirt, and secure with
long screws.
Install the O-ring into the plug.
Position the handle over the stem eyelets, and secure by
threading the plug into the handle.
Press the plug button firmly in place.
For the 74781 handle, install the O-ring, ring, and endpiece on the
opposite end of the handle.
114542-2-BC
Setscrew
Screw
Lever
Handle
(42674)
O-Ring
Plug
16
Endpiece
Ring
O-Ring
Lever
Handle
(74781)
O-Ring
Plug
Plug Button
Kohler Co.