Airflow Direction Control - Daikin J Series Service Manual

Main Functions
1.3

Airflow Direction Control

Power-Airflow The large flaps send a large volume of air downwards to the floor. The flap provides an optimum
control in cooling, dry, and heating mode.
Dual Flaps
Cooling / Dry Mode
During cooling or dry mode, the flap retracts into the indoor unit. Then, cool air can be blown far
and pervaded all over the room.
Heating Mode
During heating mode, the large flap directs airflow downwards to spread the warm air to the
entire room.
Wide-Angle The louvers, made of elastic synthetic resin, provide a wide range of airflow that guarantees a
comfortable air distribution.
Louvers
Auto-Swing The following table explains the auto swing process for cooling, dry, heating, and fan :
COMFORT The vertical swing flap is controlled not to blow the air directly on the person in the room.
AIRFLOW
Operation
16
Vertical Swing (up and down)
Cooling / Dry
10˚
20˚
15˚
65˚
60˚
(R11662)
Cooling
5˚
(R11665)
Heating
5˚
25˚
75˚
70˚
(R11664)
Heating
75˚
(R11666)
Fan
10˚
80˚
75˚
(R11663)
Function and Control
SiBE041012